Document Page: First | Prev | Next | All | Image | This Release | Search
File: 011696_103_6_066.txt
TG No. 144 August 1987
Table C-7
Pigment composition
Precent by weight
Ingredients Minimum Maximum
(a) Titanium dioxide 50.0 -
(b) Zinc phosphate 9.0 11.0
(c) Corrosion Inhibiting pigment' 0.9 1.1
(d) Siliceous extenders - 40.0
(e) Nexavalent chromium negative
Sicorin RZ, Basf Wyandotte Corp. or equivalent.
(2) Component B is composed of an aliphatic polyamine-epoxy resin
adduct combined with volatile solvents. Prior to use, 4 parts by volume of
Component A are mixed with I part by volume of Component B.
c. This prlmer is intended for use on ferrous and nonferrous substrates.
It is lead and chromate free and may be used to replace MIL-P-52192 and
MIL-P-23377.
d. Part A Is packaged In I-quart or 1-gallon containers, or 4-gallon or
5-gallon steel pails. When 5 gallon palls are specified they will contain
only 4 gallons. Part B is packaged In 1/2-pint, l-quart or 1-gallon
containers. All primary containers must be labeled "Part A (epoxy resin
component)" or "Part B (catalyst component)" as applicable. In addition,
containers should be labeled with appropriate information from Section V and
VIII of the MSDS. The emergency and first-aid procedures, type of PPE
(especially respiratory protection required) and ventilation to be used are to
be specified. The following warnings and use Instructions are required on the
containers:
C-8
Box ID = BX000000
Unit = VII CORPS
Parent Organization = ARCENT
Folder Title = PORT OPERATIONS CARC PAINTING POLICY
Subject = ARMY REGULATION 11-34 (RESPIRATORY PROTECTION PROGRAM
Document Number = 103
Image file name = 00000150.tif
Document Page: First | Prev | Next | All | Image | This Release | Search