ARMY REGULATION 11-34 (RESPIRATORY PROTECTION PROGRAM

File: 011696_103_6_060.txt
Page: 060
Total Pages: 121

TG No. 144 August 1987

b. This primer Is furnished in two components: Part A (epoxy resin) and
Part B (catalyst).

(1) Component A consists of a bisphenol type epoxy resin and a
pigment combined with the necessary amounts of flow control agents and
volatile solvents. Pigment composition of the primer is listed in table C-2.

Table C-2
Pigment composition
Percent by weight
Ingredients Minimum Maximum

(a) Iron oxide 17

(b) Basic lead silico chromate 51 --

.(c) Siliceous extending pigments, and -- 32
anti-settling agents

@(2) Component B consists of an aliphatic polyamine-epoxy resin adduct
combined with the necessary amount of volatile solvents. Prior to use, four
parts by volume of Part A are mixed with one part by volume of Part B.

c. This primer is intended for use as a chemical resistant primer coat
for materiel. It may be baked at 300 *F for 20 minutes or at a lower
temperature for a longer period of time.

d. Part A is packaged in 1-gallon containers or 5-gallon steel pails.
When 5-gallon steel pails are used, they contain only 4 gallons of material.
Component 8 is packaged in either l-quart or 1-gallon containers. Individual
containers are marked Part A (epoxy resin component) or Part B (catalyst
Component) whichever is applicable. Individual containers are also marked
with the following information:

CAUTION: Avoid contact with skin and eyes
Keep containers closed
Avoid prolonged or repeated breathing of vapor
Use with adequate ventilation
Wear fresh clothing daily when contacting Part 8
catalyst component

C-2

98
r
Box ID = BX000000
Unit = VII CORPS
Parent Organization = ARCENT
Folder Title = PORT OPERATIONS CARC PAINTING POLICY
Subject = ARMY REGULATION 11-34 (RESPIRATORY PROTECTION PROGRAM
Document Number = 103
Image file name = 00000144.tif